Buick 2004 Rainier, Пособие по эксплуатации

Страница: 9 / 20

9
pressed, the display shows the current
driver’s set temperature, automatic air
delivery mode and fan speed. The dis-
play shows the outside temperature five
seconds later. At vehicle startup (with
the ignition off for two hours), the pas-
senger temperature setting defaults to
match the driver’s setting.
Memory Feature: Up to two drivers
can store preferred climate control
settings for temperature, air delivery
mode and fan speed. See the Memory
Settings for Driver’s Seat, Mirrors,
Pedals, Radio and Climate Control sec-
tion of this booklet for more information.
Manual Operation:
The OFF, Recirculation, A/C, FRONT
Defroster buttons, fan speed and
mode controls can also be manually
adjusted as desired.
Rear Seat Controls: The rear seat
comfort controls are included with the
rear seat audio display on the rear of the
center console. The controls include a
power button to turn the controls on and
off, up and down arrows for fan speed
regulation and a MODE button to
change airflow to the rear seat from
upper, floor or bi-level. When the front
seat MODE button is set to Defrost, the
rear controls do not function. Rear outlet
air temperature is determined by the
front passenger’s temperature setting.
See Section 3 of your Owner Manual.
Outside Rearview Mirrors
The power mirrors control is located on
the driver door. To operate:
1. Turn the knob toward the mirror you
wish to adjust.
2. Move the knob in the direction you
want the mirror to go. (Adjust it so
you can see
some of the
side of your
vehicle and the
area behind
your vehicle.)
3. After adjusting
to the desired
position, return the knob to the center
position or turn it toward the other
mirror and adjust that mirror using the
same procedure.
Outside Heated: When you turn on the
rear window defogger, a defogger also
warms the outside mirrors to clear them
of mist, ice and snow.
Outside Mirror with Curb View Assist
This feature automatically adjusts one or
both mirrors downward to a preset tilt
position when the vehicle is in
REVERSE gear. The mirrors move to
their normal position when the vehicle is
moved out of REVERSE. See the
Owner Manual to activate the system for
the first time.
Saving Curb View Assist Position
Memory Settings
Follow these steps to save the curb view
assist positions into vehicle memory:
1. Press the Personalization button,
located on your steering wheel, until
Tilt Mirror in REVERSE (R)” appears
on the DIC display.
2. Press the Select button once to
choose the passenger’s side mirror,
twice for the driver’s side mirror and
three times for both mirrors.
Note: Before entering a car wash, fold
the mirrors in manually by pulling them
toward the vehicle. Push the mirrors
back out after exiting the car wash.
Rainier2004r7a 7/23/03 3:36 PM Page 9