Buhnen HB 700, Руководство по эксплуатации

Страница: 2 / 20

1 General 4
1.1 Scope of use 4
1.2 Technical data 4
2 Safety instructions 5
2.1 Potential hazards 5
2.2 Instructions for safe operation 5
3 Starting 6
3.1 Connecting up 6
3.1.1 Connecting up (operation without working bracket/workstation) 6
3.1.2 Connecting up (operation with working bracket/workstation) 6
3.2 Switching on 6
3.3 Settings on the temperature regulator 7
3.3.1 Setting the working temperature 7
3.3.2 Reading out and setting the control parameters 7
4 Operation 8
4.1 Operating position 8
4.2 Charging 9
4.3 Discharging and metering melt 9
4.4 Adjusting the spray pattern (HB 700 Spray only) 10
4.5 Automatic temperature reduction (ACE) 10
4.6 Switching off 10
5 What if... 10
5.1 Status and error messages in the display 10
5.2 Troubleshooting 11
6 Servicing/maintenance 12
6.1 Service intervals 12
6.2 Cleaning 12
6.2.1 Cleaning the nozzle 13
6.3 Nozzle systems 13
6.3.1 Replacing the cone nozzle (HB 700) 13
6.3.2 Replacing the nozzle end (HB 700) 13
6.3.3 Altering the nozzle positioning (HB 700) 14
6.3.4 Replacing the swirl nozzle, pressure spring & ball (HB 700 Spray) 14
6.4 Adjusting the cover pressure 14
6.5 Replacing the cover gasket 15
6.6 Replacing the valve assembly 16
6.7 Replacing the (complete) cover 17
7 Repairs 18
8 Warranty 18
9 Disposal 18
Table of Contents