Buhnen HB 700 KD, Руководство по эксплуатации

Страница: 18 / 41

Safety instructions
18
2 Safety instructions
2.1 Potential hazards
Danger!
Never point the operation-ready device at people.
Danger from high pressure!
Burn Hazard
Nozzle (1) and molten adhesive can be over 200 °C hot.
Wear heat-resistant gloves if contact is unavoidable.
Risk of Explosion!
When working with oxygen or combustible gases there is risk of explosion!
Irritating
Danger due to vapours!
PU hot melt adhesives give off harmful vapours (isocyanates) even when applied in
accordance with instructions. If the prescribed processing temperature is exceeded for a
longer period, harmful decomposition products will develop.
For your safety, please observe the following notes:
• Use only in well-ventilated areas (S 51).
• Do not breathe gas/fumes/vapour/spray (S 23).
• When using do not smoke, eat or drink (S 20/21).
Measures for First Aid
After skin contact: Cool the affected areas immediately with plenty of cold
water.
After contact with eyes: Rinse your eyes immediately with running water for
several minutes. Have a doctor remove the cooled adhe-
sive.
For malaise after inhaling
vapours:
Provide fresh air. For lasting malaise, consult a doctor.
After swallowing: For lasting malaise, consult a doctor.
GB