Disposal
12
Figure 4: Insert O-rings
5. Check the supplied O-rings for completeness and correct fit
(see Figure 4).
6. Position the module to the application head and screw on.
7. Screw on the nozzle at the nozzle foot of the module
(Item (8) in
Figure 2)
.
It may be necessary to wait until the new module has reached the operating tempera-
ture.
7
Repairs
Repairs other than those described in these operating instructions may only be imple-
mented by competent persons commissioned by BÜHNEN or otherwise competent per-
sons with the use of original BÜHNEN spare parts.
8
Warranty
The device was developed and manufactured according to the latest state of technology.
First-time purchasers receive warranty on function, material, and processing according to
statutory regulations. Normal wear and tear is excluded.
The warranty is void if improper handling, use of force, third-party repairs and installation
of spare parts other than the original has been determined.
The warranty extends to servicing or replacing according to our choice. Warranty beyond
our scope of delivery is excluded, as we do not have any influence on the competent and
expert use of the unit.
Please observe our terms and conditions!
9
Disposal
Take the device, packaging, and accessories to an environmentally friendly recycling cen-
tre (in accordance with Directive 2012/19/EU of the European Parliament and the Council
of
4 July 2012).
Also comply with the laws and directives applicable in your country.
FCH0479-2XM_EN_191107.indd 12
07.11.19 14:03
