manualshive.com logo in svg

Buhler Versatile 2290, Руководство оператора

Операторский мануал для Buhler Versatile 2290 - бесплатно скачайте его с {веб-сайта}. Этот мануал поможет вам ознакомиться с функционалом и обслуживанием вашего трактора. Загрузите руководство по эксплуатации сейчас, чтобы успешно использовать свою технику.

Поделиться
Скачать
background image

386

TO THE OWNER:

This manual contains information concerning the operation, adjustment, and maintenance of Buhler Versatile
4WD tractors. You have purchased a dependable machine, but only by proper care and operation can you
expect to receive the performance and long service built into this tractor. HAVE ALL OPERATORS READ
THIS MANUAL CAREFULLY AND KEEP IT AVAILABLE FOR READY REFERENCE.

The tractor was designed to pull agricultural equipment in agricultural applications at field speeds of 7.2 KPH
(4.5 MPH) or greater. Proper ballasting to provide equal traction to front and rear axles under moderate to
heavy load will improve tractor performance and life. Using the tractor in industrial only applications (ie. road
building) will not be covered by warranty.

Your Buhler Versatile dealer will instruct you in the general operation of your tractor. Your dealer’s staff of facto-
ry-trained service technicians will be glad to answer any questions that may arise regarding the operation of
your tractor.

For engine maintenance not covered in this manual, follow the instructions provided in the Cummins Engine
Operator’s manual. Before putting the tractor in service, become familiar with the procedures outlined in both
manuals.

The warranty coverage that is extended to your Buhler Versatile 4WD tractor is explained in the Warranty and
Limitation of Liability form. Your dealer will provide you with a copy of the warranty and retain a copy which you
have signed. After you read the warranty, ask your dealer to explain any points that you may not understand.

Do not modify, alter, or permit anyone else to modify or alter this tractor or any of its components, or any tractor
function, without first consulting an authorized Buhler Versatile dealer. If you have any questions regarding
tractor modifications, contact Buhler Versatile Inc., 1260 Clarence Ave. Winnipeg MB, R3T 1T2.

Your safety, and the safety of those around you depends upon the care and good judgement you use while
operating this equipment. Read the safety precautions carefully.

For a complete list of the delivery service checks performed by your dealer, refer to the Delivery Report in this
manual. The first copy is your record of the service performed and the second copy, which is to be removed
from the manual, is your dealer’s record. MAKE SURE THAT YOU AND THE DEALER SIGN BOTH COPIES.

After you have operated the tractor for 50 hours, have your dealer perform the factory recommended 50-hour
service. Return this manual with your tractor to the dealer so the “First 50-Hour Service” checklist can be filled
out. You will be responsible for the cost of lubricants, fluids, filters and other items replaced as part of normal
maintenance. Prior to taking the tractor to your selling dealer for service, it is recommended that you contact
them to determine any other charges for which you may be responsible.

All data given in this book is subject to production model variations. Dimensions and weights are approxima-
tions only, and the illustrations do not necessarily show tractors in standard condition. For exact information
about any particular tractor, please consult your Buhler Versatile dealer.

CAUTION: THIS SYMBOL IS USED THROUGHOUT THIS BOOK WHENEVER PERSONAL SAFETY IS
INVOLVED. TAKE TIME TO READ AND FOLLOW THE INSTRUCTIONS. BE CAREFUL!

CAUTION: PICTURES IN THIS MANUAL MAY SHOW PROTECTIVE SHIELDING OPEN OR REMOVED
TO BETTER ILLUSTRATE A PARTICULAR FEATURE OR ADJUSTMENT.

BE CERTAIN, HOWEVER, TO CLOSE OR REPLACE ALL SHIELDING BEFORE OPERATING THE
MACHINE.

IMPROVEMENTS

Buhler Versatile Inc. is continually striving to improve its products. We reserve the right to make improvements
or changes when it becomes practical and possible to do so, without incurring any obligation to make changes
or additions to the equipment sold previously.

Содержание Versatile 2290





























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Versatile 2290

Valtra T Series Operator'S Manual preview
T Series
Бренд: Valtra Страницы: 31
Mahindra 35 Series Service Manual preview
35 Series
Бренд: Mahindra Страницы: 368
Craftsman 486.248476 Operator'S Manual preview
486.248476
Бренд: Craftsman Страницы: 24
Craftsman 917.99039 Operator'S Manual preview
917.99039
Бренд: Craftsman Страницы: 36
Craftsman 917.257571 Owner'S Manual preview
917.257571
Бренд: Craftsman Страницы: 28
Craftsman CMXGZBF7124441 Instruction Manual preview
CMXGZBF7124441
Бренд: Craftsman Страницы: 36
Craftsman 917.203930 Operator'S Manual preview
917.203930
Бренд: Craftsman Страницы: 72
Craftsman 917.257572 Owner'S Manual preview
917.257572
Бренд: Craftsman Страницы: 28
Husqvarna LTH125 Instruction Manual preview
LTH125
Бренд: Husqvarna Страницы: 68
Husqvarna TS 343 Instruction Manual preview
TS 343
Бренд: Husqvarna Страницы: 104
Kverneland A136138200 User Manual preview
A136138200
Бренд: Kverneland Страницы: 74
Whirlpool TU800SPPB2 Parts List preview
TU800SPPB2
Бренд: Whirlpool Страницы: 7
Whirlpool TU 4000 Series Use And Care Manual preview
TU 4000 Series
Бренд: Whirlpool Страницы: 12
Whirlpool Trash Masher JTF8500XL User Manual preview
Trash Masher JTF8500XL
Бренд: Whirlpool Страницы: 16
Whirlpool W10318827C Use & Care Manual preview
W10318827C
Бренд: Whirlpool Страницы: 24
Whirlpool TU950QPXB0 Use & Care Manual preview
TU950QPXB0
Бренд: Whirlpool Страницы: 24
Winton WBS01 Owner'S Manual preview
WBS01
Бренд: Winton Страницы: 4
Daedong KIOTI DK35SE Manual preview
KIOTI DK35SE
Бренд: Daedong Страницы: 221

Бренды по названию

Популярные бренды

Загрузить еще бренды