Bedienungs- und Installationsanleitung
Installation- and Operation Instruction
Meßgaskühler / Sample Gas Coolers PKE-42
1 Introduction
The sample gas coolers of model series PKE42 are designed for installation in gas analysis systems. Check
technical data according to the datasheets attached with regard to the specific application, used material com-
binations, as well as pressure- and temperature limits.
2 Important
Advice
Operation of the device is only valid if
−
the product is used under the conditions described in the installation- and operation instruction, the inten-
ded application according to the type plate and the intended use,
−
the performance limits given in the datasheets and in the installation- and operation instruction are obey-
ed,
−
monitoring devices and safety devices are installed properly,
−
service and repair is carried out by Bühler Technologies GmbH,
−
only original spare parts are used.
This manual is part of the equipment. The manufacturer keeps the right to modify specifications without ad-
vanced notice. Keep this manual for later use.
Definitions for warnings:
NOTE
Signal word for important information to the product.
CAUTION
Signal word for a hazardous situation with low risk, resulting in damaged to the device or
the property or minor or medium injuries if not avoided.
WARNING
Signal word for a hazardous situation with medium risk, possibly resulting in severe injuries
or death if not avoided.
DANGER
Signal word for an imminent danger with high risk, resulting in severe injuries or death if
not avoided.
Warning against hazardous
situation
Warning against possible
explosive atmospheres
disconnect from
mains
Warning against electrical
voltage
Warning against hot surface
wear respirator
Warning against respiration
of toxic gases
wear face pro-
tection
Warning against acid and
corrosive substances
wear gloves
BX440009, 10/2008 Art. Nr. 90 31 100
11
