Bedienungs- und Installationsanleitung
Installation- and Operation Instruction
Meßgaskühler / Sample Gas Coolers PKE-42
2.1
General indication of risk
Check all relevant safety regulations and technical indications for the specific installation place. Prevent fail-
ures and protect persons against injuries and the device against damage.
The person responsible for the system must secure that:
−
safety and operation instructions are accessible and followed,
−
local safety regulations and standards are obeyed,
−
performance data and installation specifications are regarded,
−
safety devices are installed and recommended maintenance is performed,
−
national regulations for disposal of electrical equipment are obeyed.
Maintenance and repair
−
Repairs on the device must be carried out by Bühler authorized persons only.
−
Only perform modifications, maintenance or mounting described in this manual.
−
Only use original spare parts.
During maintenance regard all safety regulations and internal operation instructions.
DANGER
Electrical voltage
Electrocution hazard.
Disconnect the device from power supply. Make sure that the equipment
cannot be reconnected to mains unintentionally.
The device must be opened by trained staff only.
DANGER
Toxic and corrosive gases
Sample gas can be hazardous.
Take care that the gas is exhausted in a place where no persons are in danger.
Protect yourself during maintenance against toxic / corrosive gases. Use
gloves, respirator and face protector under certain circumstances.
DANGER
Explosion hazard if used in hazardous areas
The device is not suitable for operation in hazardous areas with potentially
explosive atmospheres.
Do not expose the device to combustible or explosive gas mixtures.
12
BX440009, 10/2008 Art. Nr. 90 31 100
