Buhler Farm King Grain Vac Conveyair 6640, Руководство оператора и каталог запасных частей

Страница: 18 / 62

18
Operation - Grain Vac
Long Distance Transfer
WARNING
Do not use P.V.C. or other plastic tubing for long distance
application. The build-up of static electricity could lead to an
explosion.
Auxiliary airslide. Located on the airline
between the receiver tank and the air pump.
If discharge length is more than 40 ft. (12 m)
or if blower gets too hot to the touch, open the
airslide approximately 1/4" - 1/2" (6 - 12 mm)
for every 100 ft. (30 m) discharge. Open further
if blower still gets hot.
Opening the airslide too far will affect capacity
as adversely as not opening it at all.
Top Loading (push only)
For top loading, remove top cover of large
cyclone. To avoid feedback be sure grain enters
below opening to BPS (smaller) cyclone.
Long Distance Suction
For sucking grain more than thirty feet, use
straight piping where possible!
Remember: The straighter the suction line the
greater the capacity of the grain vac.
Clean Up
When the machine needs not to be at full
capacity, e.g. when cleaning bins, the tractor
can be throttled down.
The rougher walls of the steel flex hose and the
poly intake hose provide more resistance than
smooth pipe. Capacity may be lowered by 20%
to 40% compared to straight piping.
Use Poly hose for clean up only.
For regular cleanup use a combination of steel
flex line, straight piping and poly hose. This
will give you the needed flexibility to easily get
into corners and around obstructions without
sacrificing too much capacity.
Feed grain below opening
to second cyclone
Auxiliary
Airslide
Steel Flex Hose
Poly
Intake Hose
Do not dent, stretch or overbend steel flex line
excessively.
Do not store poly hose, steel flex, aluminum
tubes, wands or nozzles outside in the
elements. Avoid sharp obstructions that could
cut or puncture the hose.