LPV-WL11G User’s Manual (Introduction)
16
Printing from UNIX base Computer
LPV2 is not able to be setup directly from UNIX base Computer. You need to use Windows base
computer with Buffalo Wireless Client (WLI-PCM-L11G etc.) to setup the LPV2 to be able to
Print from UNIX base Computer.
Procedure:
1 Set LPV2. IP Address (In case of Static IP
）
2 Verify the IP Address setting
3 Edit "/etc/hosts" file
4 Edit "/etc/printcap"
5 Print by using "lpr" command
LPV2 default setting:
• Server Name:
WS-xxxxxx
• (xxxxxx is last 6 digit of MAC address. Please Refer to Page 11)
• Printer Port Name:
WS-xxxxxx-P1
• IP Address:
DHCP/BOOTP/RARP - automatically allocated by Server
1
Set LPV2 IP Address
EX: Use following command:
Arp -s 192.168.9.123 00:60:1D23:BA:42
(Set LPV2 IP Address to 192.168.0.123)
If the LPV2 IP Address is set to [1.1.1.1], it is not able to print through LPV2. Please
set IP to other than [1.1.1.1].
2
Verify the IP address setting
EX: USE following command:
Ping 192.168.0.123
3
Edit "/etc/hosts" file
Define LPV2 IP Address, Domain Name and LPV2 Server Name on "etc/hosts" file.
Add as following:
192.168.0.123
