background image

LPV-WL11G User’s Manual (Introduction)

4

Prohibit

Do not handle the equipment with wet hands while the power supply cable is
connected to the AC socket.

This may result in electric shock.

Unplug the 

power supply

If you see smoke or smell strange or hear noise from the device unplug the
power.

Using the device continuously may result in a short circuit, fire, or electric shock. Con-
sult your dealer immediately.

Unplug the 

power supply

If the product is dropped or subjected to severe shock, unplug the power.

Using the device continuously may result in a short circuit, fire, or electric shock. Con-
sult your dealer immediately.

Unplug the 

power supply

If liquid or foreign matter enters the equipment, unplug the power.

Using the device continuously may result in a short circuit, fire, or electric shock. Con-
sult your dealer immediately.

Prohibit

Do not damage, process, overheat or attempt to repair the power supply cable,
as this may result in fire or electric shock.

• When installing this product, do not crimp the power supply cable.
• Do not place heavy objects on the power supply cable, or pull the cable.
• Do not place the power supply cable close to heat sources, or overheat the cable.
• When removing the power supply cable, be sure to remove it by holding the plug.
• Do not bend the cable too much.
• Do not move this product with the power supply cable still connected.
• If the power supply cable is damaged, replace it.

Strongly

recommended

Use this product under supervision and guidance of an adult when a small child
uses.

Strongly

recommended

Insert the AC adapter into the AC socket firmly.

Using this product without the AC adapter firmly inserted may cause a short circuit,
overheating, fire or electric shock.

Strongly

recommended

Be sure to use the Power Cable (AC adapter) provided.

Using other Power cable (including internal connections) and AC adapter may cause
fumes or fire due to incompatible voltage or terminal polarity.

Содержание LPV2-WS11GC


























Отзывы: