LPV-WL11G User’s Manual (Introduction)
11
WIndows Adhoc Mode Setting
Windows Adhoc Mode allows you to print directly through LPV2, not via AirStation. This set-
ting process is basically same amoung any MS-Windows. This capter shows how to setup with
Windows98.
1
Start LPV2 Manager
• If you don’t not know about “Channel”, please open Client Manager Program and refer to
Manual Setting window by selecting [File]-[Manual Setting].
• If you are using WEP Key, put check mark on the [Use WEP Key] Box and enter WEP
Key.
2
3
Setup is completed.
Click “Wireless Setting” and set “Ad-
hoc“ mode.
Set Wireless Setting
Click
［
OK
］
Please re-enter WEP Key again at
“Setup WEP Key again” message
Click
［
OK
］
Click
［
OK
］
Click
［
OK
］
