Buffalo GF269, Инструкция по эксплуатации

Страница: 7 / 64

2
Operation
BUFFALO Conveyor Toasters can be set up to return the toast from the front or rear of the appliance. This
is known as ‘Return’ or ‘Pass-through’ operation and can be set up to best suit the kitchen environment.
Fit the Feeder
1.
Squeeze the arms of the feeder and slot the arms in to the
feeder mounting holes.
2.
Rest the legs on the outside of the appliance [Fig. 1] .
Return Operation
To set-up the toaster for return operation:
1.
Close the back door of the appliance and fix it in the vertical
position.
2.
Slide the return chute in to the bottom of the appliance and
secure it to the two pins located inside the rear of the
appliance.
WARNING: Take care to avoid touching the surfaces as surfaces remain hot during and
immediately after use.
Feeder mounting
holes
Belt
Crumb tray
Power level knob
Power indicator light
Belt speed knob
Return chute pins
Return chute
Pass-through chute
Fig. 1