11. CHANGING THE INJECTOR (Gas safe engineer only)
15/22
11.1 Changing Burner Injectors for Open Flame Burners: ( Figure A )
-
In order to change burner injectors, remove cast pan supports(CC18).
-
After removing the burner caps(BR31), remove s/s hob plate, unscrew the injector
counter clockwise, using an appropriate wrench.
-
Identify the injector depending on the new gas type and pressure, in the gas system
change table (NOZZLES AND SETTINGS) and find this type of injector in the reserve
injector pocket. Check the number on the injector whether it is the correct type of
injector. Ensure the injector is unobstructed.
-
Mount the injector to injector connection, and screw clockwise tightly.
Figure A: Changing Burner Injectors
for Open Flame Burners
Note:Installation of the appliance or conversion to other gases
must only be carried out by trained gas safe registered catering
engineers.
11.1 Changing Burner Injectors for Open Flame Burners
11.2 Changing Burner Injectors for Ovens
11.3 Making Air Adjustments
TYPE
TOTAL POWER (kW)
NATURAL GAS
LPG ( G30 50 )
CT253
G20-21 mbar: 31,8 KW
G30-37 mbar:30 KW
3,37 m³/h
2,48 kg/h
GAS CONSUMPTION
TABLE : Total power and consumption data
