8. BEFORE THE INSTALLATION
11/22
8.9 MOVING THE APPLIANCE
☞
The appliance can be moved with supplementary suitable
handling equipment.
☞
Bearers of the handling equipment should be placed under
the appliance.
☞
If the transported distance is significant, the machine should
be moved slowly and the appliance should be fixed on pallet or
supported in order to prevent jolt.
☞
Do not hit or drop the appliance when moving.
8.8Check whether the parts of the appliance are
complete and whether any damage has occurred
during the transportation.
8.11 After removing PVC, clean adhesive residuals on the appliance before use.
8.10 Before installing the appliance remove PVC films. Be aware that static
electricity can occur during this process.
8.6 PACKING
Packing materials are environment friendly and can be stored without risk, disposed of in accordance
to local authorities requirements.
Polyethylene: wrapping, instruction booklet bag, gas nozzle bag.
Polypropylene: roof packing panels, straps.
Card board: corner protectors.
The appliance is placed on the wooden pallet. A cardboard carton is placed over the unit
Put a wooden frame over the carton pack.It is connected with plastic straps.
8.7 UNPACKING
IMPORTANT!
Immediately check for any damage caused during transport.
Unpack, taking care not to damage the equipment.Wear protective gloves. Carefully remove the
protective film from metal surfaces and clean any traces of glue with a suitable solvent. For hidden
damage or shortages becoming apparent only after unpacking contact immediately your distrubutor for
advice. Keep all the documentation contained in the packing.
