Buffalo BSL-PS-G2108M, Руководство пользователя

Страница: 59 / 67

- 58 -
Chapter 3 - Troubleshooting
Power LED is not lit
Check that the switch and the power outlet are connected by the power cable.
Link LED is not lit
• Check that the power of the switch and connected device are turned on.
• Check that the switch and the connected device are both connected by a Ethernet cable.
• Check that an appropriate type of cable is used and that the cable length does not exceed the
specifications.
• Check that the Ethernet adapter on the connected device is operating properly and that there are
no problems with the Ethernet cable.
Can’t access via browser
• Check that you are connected to a port that is a member of the management access VLAN.
• Check that the Link LED for the connected port is lit.
• Check that the port being used is not disabled.
Forgot password and cannot login
• If the reset switch is enabled, you can restore the factory default settings by pressing the reset
button. The reset switch is enabled by default.
• If the reset switch is disabled, please contact Buffalo technical support.