3
PPTP (VPN) Server Setup
The PPTP Server Setup is required
if you wish to utilize the features of
the “Network Service List”.
◗
To utilize the feature select
‘Enable’
.
◗
Select the type of authentication
desired. The default setting of
“MS-CHAPv2-MPPE-40/128” is
supported by all Microsoft dial up
clients. This is the recommended
setting.
◗
Input the IP Address of the LAN
Port in the
‘Local IP Address’
field. The LAN port default setting is 192.168.12.1. If
the default LAN Port was changed in the intial setup, then please enter the IP Address
it was changed to. (Required Field)
◗
In the
'Remote IP Addresses'
fields, set the range of IP Addresses to supply to VPN
Clients. This can be the same range as the DHCP server or you can set a separate
range specifically for the VPN Clients. (Required fields)
◗
If desired, add a WINS Server Address in the
‘WINS Server Address’
field. (Not
Required)
◗
If desired, add a DNS Server IP Address in the
‘DNS Server Address’
field. It is
recommended to add the DNS Server info if in an Active Directory Domain. (Not
Required)
◗
If you wish to restrict inbound connections based on the Remote IP Address(es) click
on
‘Enable’
in the
‘Enforce Address Restriction’
field. After pressing the
‘Apply’
button
, scroll to the bottom of the page to register the allowable address(es).
Press the
‘Apply’
button to register your settings in the AirStation.
