Chapter 1 Product Overview
- 5 -
3 blinks
*2
:
Wired Ethernet LAN error.
4 blinks
*2
:
Wireless LAN error.
5 blinks:
USB error.
9 blinks
*2
:
System error.
Continuously
blinking
*1
:
Updating firmware, saving settings, or initializing settings.
*1 Never unplug the AC adapter while the Diag LED is blinking continuously.
*2 Turn off AirStation first, wait for a few seconds, then turn it back on.
3
5 GHz LED (Blue)
On:
5 GHz wireless LAN is enabled.
Randomly blinking: 5 GHz wireless LAN is transmitting.
2 blinks:
AirStation is waiting for an AOSS or WPS security key.
Continuously
blinking:
AOSS/WPS error; failed to exchange security keys.
Note: This LED is off when “LED Setting” is set to Off. The default setting is Off (Disable). Enable the wireless
function by referring to “Enabling the Wireless LAN Functions and Making the Encryption Settings” (page16).
4
2.4 GHz LED (Green)
On:
2.4 GHz wireless LAN is enabled.
Randomly blinking: 2.4 GHz wireless LAN is transmitting.
2 blinks:
AirStation is waiting for an AOSS or WPS security key.
Continuously
blinking:
AOSS/WPS error; failed to exchange security keys.
Note: This LED is off when “LED Setting” is set to Off. The default setting is Off (Disable). Enable the wireless
function by referring to “Enabling the Wireless LAN Functions and Making the Encryption Settings” (page16).
5
LAN LED (Green)
On:
An Ethernet device is connected.
Blinking:
An Ethernet device is communicating.
6
Antenna Connector
Screw on the included antennas here.
Note: The supplied antenna supports both the 2.4 GHz and 5 GHz bands.
