Buffalo Tools Sportsman GEN2K, Инструкция по эксплуатации

Страница: 36 / 37

ITEM # GEN2K Portable Gasoline Generator
36
replaced under warranty will be warranted for the remainder of the period.
(2) Any warranty part that is scheduled only for regular inspection in your Owner’s Manual is warranted for
warranty period stated above. Any such part repaired or replaced under warranty will be warranted for the
remaining warranty period.
(3) Any warranted part that is scheduled for replacement as required maintenance in your Owner’s Manual is
warranted for the period of time before the first scheduled replacement date for that part. If the part fails before
the first scheduled replacement, the part will be repaired or replaced by Buffalo Corp. according to the Subject
(4) below. Any such part repaired or replaced under warranty will be warranted for the remainder of the period
prior to the first scheduled replacement point for the part.
(4) Repair or replacement of any warranted part under the warranty provisions herein must be performed at a
warranty station at no charge to the owner.
(5) Notwithstanding the provisions herein, warranty services or repair will be provided at all of our distribution
centers that are franchised to service the subject engines.
(6) The engine owner must not be charged for diagnostic labor that leads to the determination that a warranted
part is in fact defective, provided that such diagnostic work is performed at a warranty station.
(7) Buffalo Corp. is liable for damages to other engine components proximately caused by a failure
under warranty of any warranted part.
(8) Throughout the engine warranty period stated above, Buffalo Corp. will maintain a supply of warranted
parts sufficient to meet the expected demand for such parts.
(9) Any replacement part may be used in the performance of any warranty maintenance or repairs and must be
provided without charge to the owner. Such use will not reduce the warranty obligations of Buffalo Corp.
(10) Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of
any non-exempted add-on or modified parts by the ultimate purchaser will be grounds for disallowing a
warranty claims. Buffalo Corp will not be liable to warrant failures of warranted parts caused by the use of a
non-exempted add-on or modifed part.
(11) The manufacturer issuing the warranty shall provide any documents that describe that manufacturer’s
warranty procedures or policies within five working days of request by the Air Resources Board.
EMISSION WARRANTY PARTS LIST
(1) Fuel Metering System:
(a) Gasoline carburetor assembly and its internal components (b) Carburetor gaskets
(c) Fuel line (d) Clamps (e) Fuel tank
(f) Fuel line fittings (g) pressure regulator (if equipped)
(h) Mixer assembly and its internal components (if equipped)
(2) Air induction system including:
(a) Intake pipe/manifold (b) Air cleaner
(3) Ignition system including:
(a) Spark plug (b) Ignition coil
(4) Catalytic muffler assembly including:
(a) Muffler gasket (b) Exhaust manifold (c) Catalytic converter
（ if available ）
(5) Crankcase breather assembly including
(a) Breather connection tube
(6) Fuel tank evaporative emissions control system including:
(a) Purge valves (b) Carbon canister (c) canister Mounting Brackets
(d) Fuel Cap (e) Fuel Tank
(7) Miscellaneous items used in above systems including:
(a) Switches (b) Hoses, belts connectors, and assemblies
(8) Air injection system
(a) Pulse valve