PS07570 MIG135 115 V MIG Welder Assembly & Operating Instructions Manual
2
GENERAL PRODUCT SPECIFICATIONS
SPECIFICATIONS
4 Voltage Settings For Fine Adjustment
Input 115V, 60HZ, 20A
Max output 18V Dc
OCV: 29V Dc
Rated Welding Current: 88A at 20% Duty Cycle
Welding Current Adjustment Range 20-88A (PEAK 135A
)
Welds Mild Steel Between 24 gauge To 3/16”
In A Single Pass
Self-Resetting Thermal Overload & Motor Protection
Working Air Pressure Range is 40-90psi
FEATURES:
Includes 10 ft MIG Gun (TWECO)
8 Ft Power Cord
9.8 Ft Ground Cable With Clamp
Dual Gauge Regulator With Gas Hose
3 Pieces .030 Contact Tips
0.5 kgs Flux Core Wire
0.5 kgs MIG Wire
5 kgs Spool Adapter
This product contains chemicals known to the State of California to cause cancer
and birth effects or other reproductive harm.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
When unpacking, check to make sure all parts listed are included. If any parts are missing or broken,
please call Customer Service at 1-888-287-6981.
FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual contains important information regarding safety, operation, maintenance and storage of this
product. Before use, read carefully and understand all warnings, cautions, instructions and labels.
Failure to do so could result in serious personal injury, property damage or even death.
IMPORTANT SAFETY RULES
Wire
Speed/
Amperage
Power On/Off
Heat Voltage
Cable/Ground
Clamp
