20
Problem
Correction
1. The wire feeder is not working, no wire
coming out from the MIG torch
1. Please check the roller if it is running.
2. Please put the wire deep inside the MIG torch, then push the trigger
again.
2. The wire automatic coming out from the MIG
torch and non-stop, even push the button of
MIG torch
Electric board is broken (change board)
3. Whatever the wire feeder if working, there's
no wire coming from the MIG torch, even push
the button of MIG torch
First check the trigger of MIG torch, if trigger has a problem, please
change a new one;
If not OK , then check if the Electric board is broken (change board)
4. The machine is not working, OC light is on,
power is on, fan is working
Wait a few minutes, the machine may be over-heated. Allow it to cool
5. The wire feeding speed is not powerful and
slowly
The four -angles switch (on the wire feeder) is too tight, make it a little
loose
Содержание HIT140
Страница 5: ...5 Assembly B FOR GASLESS WELDING ...
Страница 6: ...6 C FOR GAS WELDING D FOR MMA WELDING ...
Страница 21: ...21 ...
Страница 22: ...22 ...