manualshive.com logo in svg

Buehler IsoMet 5000, Руководство пользователя, Страница: 30 / 76

Поделиться
Скачать
Buehler IsoMet 5000 Скачать руководство пользователя страница 30

 

24 

MA112780_38.6 

[Original Instructions] 

9/19/2011 

Multiple Cuts Using the Specimen Positioning System with the DATUM OFF 
Function 

When the DATUM function is in the OFF position, the SPECIMEN QUANTITY equals the total 
number of cuts. 

1.  Adjust the BLADE SPEED, FEED RATE, CUTTING LENGTH, SAMPLE THICKNESS, 

SPECIMEN QUANTITY, and BLADE THICKNESS. 

 

Press the SCROLL button until the desired parameter is highlighted and adjust the 
parameter values using the INCREASE or DECREASE buttons. 

2.  Use the SCROLL button to scroll to the L4 Screen. 

3.  Press the DATUM button to the OFF position. 

4.  Position the specimen using any of the required chucks. 

5.  Use the SCROLL button to scroll to the L1 Screen. 

6.  Press the PUMP MOTOR button to the ON position and position the coolant flow as desired. 

7.  Press the CUTTING CYCLE button to the ON position. The blade will begin to rotate at the 

selected speed, the coolant will begin to flow, and the automatic feed will begin to advance. 

 

The SPECIMEN QUANTITY parameter field will display the number of cuts: 

1 of #, 2 of #, 

3 of #, etc.

 as the cuts are made to the specimen. 

 

The blade advances to cut the specimen determined by the CUTTING LENGTH 
parameter value. As the blade advances the numerical value on the display screen will 
start to decrease. When the DISTANCE REMAINING field  
reaches .00, the blade turret will retract, the Specimen Positioning System will advance 
for the next cut, and the cutting cycle will begin again. 

8.  The cutting cycle will continue until the number of cuts (SPECIMEN QUANTITY) is 

completed. 

If after the CUTTING CYCLE is completed and more cuts are desired from the remaining 
specimen, re-position the specimen first before pressing the CUTTING CYCLE button to the ON 
position. 

If the specimen is not re-

position, the blade will advance and make an “air” cut first before cutting 

the specimen. 

Содержание IsoMet 5000













































































Отзывы:

Нет отзывов