background image

3

 

Operating the appliance

Logano GB102– 6 720 811 066 (2014/09)

6

3.5

Setting the DHW

3.5.1

DHW on/off

▶ Press 

the  

button 

repeatedly 

until 

the  

symbol 

or 

the 

flashing 

 is displayed.

Fig. 8  

DHW display

▶ Press  

+

 or 

  – 

 button to set the desired hot water use:

 = DHW mode

 + Eco = Eco mode

 = DHW mode off

▶ Press 

ok

 to save the setting.

The tick symbol 

 is displayed briefly to confirm that the setting 

has been saved.

Fig. 9  

Eco mode setting

 The burner symbol    is displayed when there is a DHW demand.

DHW or Eco mode?

DHW mode

If the temperature in the hot water tank falls by more than 5 K (° C) 
below the set temperature, the hot water tank is heated back up to 
the set temperature. The control then switches back into heating 
mode.

Eco mode

If the temperature in the hot water tank falls by more than 10 K (° C) 
below the set temperature, the hot water tank is heated back up to 
the set temperature. The control then switches back into heating 
mode.

3.5.2

Setting the DHW temperature

▶ DHW or Eco mode, (

 page 6).

▶ Press the 

 button.

The set DHW temperature flashes.

Fig. 10  

▶ Press the  

+

 or

   – 

 button, to select the desired DHW temperature, set 

between 40 and 60 °C.

▶ Press the  

ok

 button to save the setting.

The tick symbol 

 is displayed briefly, to confirm that the setting 

has been saved.

Fig. 11  

3.6

Control unit setting

Some of the features described in this section change when connected 
to another control unit (e.g. RC35):

• Communication with the control unit and base controller
• Setting parameters

No heating will occur if the Heating mode has been set to 
off.

6 720 619 605-18.1O 

6 720 619 605-19.1O 

It is recommend that the temperature is set to at least 
55 °C to prevent bacterial contamination, such as 
Legionella.

Control unit instructions

 

The instructions will show you how to:
▶ set the mode and the heating curve using feedback 

from an outside temperature sensor.

▶ set the room temperature.
▶ heat economically and save energy.

6 720 619 605-20.1O 

6 720 619 605-19.1O 

Содержание Logano plus GB102













Отзывы: