Buderus Logano plus GB102, Инструкция пользователя

Страница: 4 / 12

3 Operating the appliance
Logano GB102– 6 720 811 066 (2014/09) 4
3 OPERATING THE APPLIANCE
This manual only applies to the appliances listed on the front cover.
Depending on the control system fitted some function may different.
The following option control systems can be used:
• RC35externally mount programmer
• Logamatic 4000
3.1 Controls overview
Fig. 1
[1] Main on/off switch
[2] Diagnostic port (Service engineers only)
[3] DHW button
[4] Heating button
[5] Display
[6] Minus button
[7] Plus button
[8] ok button
[9] Back button
[10] Pressure gauge
[11] Service button
[12] Reset button
[13] Summer/Winter mode button
3.2 Screen display
Fig. 2 Display symbols
[1] DHW mode off
[2] DHW mode on
[3] Solar mode
[4] Weather compensation (External sensor required)
[5] Chimney sweep mode
[6] Fault alert
[7] Service mode
[6 + 7] Maintenance mode
[8] Burner on
[9] Temperature units °C
[10] Confirmation
[11] Scroll up or down through the sub menus
[12] Alphanumeric display (e.g. Temperature)
[13] Text display
[14] Heating mode off
[15] Heating mode on
3.3 Appliance on/off switch
Initial switch on
▶ Switch on at the with the main appliance switch.
The display lights up and initially shows the appliance temperature.
Fig. 3 Main power switch
For more information refer to the manual of that
controller or programmer.
10
6 9 4 7 3 2 8
11 13 12
reset
5 1
6720809978-01.1Wo
The siphon fill program starts each time the appliance is
turn on. The appliance runs at minimum output for about
15 minutes to fill the condensate siphon.
The symbol . flashes while the program is active.
13 12 14 15
2 3 4 8 7 6 9 5
11
6 720 619 605-12.1O
10
1
6 720 646 606-27.1O