5
Installing the boiler
Logano G115 WS US/CA – 6 720 813 418 (2019/09)
27
5.8.3
Connecting the power supply and additional components
Establish a permanent connection to the mains power supply in
accordance with the locally applicable regulations.
▶ Route all cables through the cable entries to the control panel and
connect in accordance with the wiring diagram.
5.8.4
Fitting cable ties
Secure all cable runs with cable ties (included with the control):
▶ Insert the cable ties together with the cable from the top into the slots
in the frame (step 1).
▶ Slide the cable ties downward (step 2).
▶ Push against the ties (step 3).
▶ Flip the toggle up (step 4).
Fig. 24 Securing cables with cable ties
5.9
Fitting outer casing panels
▶ Position and secure the control device cover.
▶ Fit the rear boiler cover.
▶ Secure by reinstalling cover screws and jacket panel screws.
Fig. 25 Fitting the rear boiler cover
[1]
Controls cover
[2]
Rear boiler cover
WARNING:
Fire hazard from hot boiler components.
Hot boiler components may damage electrical cables.
▶ Ensure that all wiring is routed in the ducts provided
or on the boiler insulation.
7 747 019 141-25.1RS
