OPERATIONS
POWERmini USB User Guide 2.1.0A
5
350-00103-5
Control Settings
This page contains settings for auto-cutoff audible alarm, over-voltage and under-voltage limits.
When Auto-Off is enabled POWERmini will automatically disconnect the load from the battery. When
Auto-off is disabled the output will not be disconnected but an audible alarm (if enabled) will sound.
Over voltage settings control the point at which POWERmini USB will disconnect or reconnect the battery
and the load.
Figure 7 Control Settings page
Auto off
(Enable/Disable)
Select whether auto-shutdown is enabled or not.
Alarm
(Enable/Disable)
Enable or disable the audible alarm that indicates when
an over voltage or under voltage condition has
occurred.
HV trip
(15- 16V)
The output is automatically disconnected when it
exceeds this trip voltage
HV reset
(0.5
–
1.5 below the HV trip setting)
The output is reconnected after a HV trip when the
voltage is at or below this voltage limit
