Bucktool TDS-200C4HL, Инструкция по эксплуатации

Страница: 15 / 28

ASSEMBLY AND ADJUSTMENTS
Estimated Assembly Time: 5 - 10 Minutes.
• To avoid injury, do not connect this bench grinder to the power
source until it is completely assembled and adjusted, and you have
read and understood this Instruction Manual.
• To reduce the risk of injury, turn unit off and disconnect it from
power source before installing and removing accessories, before
adjusting or when making repairs. An accidental start-up can cause
injury.
1. Attach the right tool rest bracket to the
right wheel guard using a bracket knob
and flat washer as shown in Fig
.
A.
NOTE: Ensure the locating pin passes
through the bracket as shown and the
registration disc of the bracket is facing
inwards as shown.
INSTALLING TOOL
RESTS (FIG. A,B)
Fig. A
2. Attach the right tool rest to the bracket
using a tool rest locking knob as shown
in Fig.B. Ensure the flat profile of the
tool rest is facing towards the stone.
NOTE:
When in use, the tool rests
should be adjusted to within 1/16 in.
(1.6 mm) of the grinding wheel or
other accessory being used.
3. Attach the left tool rest following the
same procedure as above.
Fig. B
ASSEMBL
Y INSTRUCTIONS
14
TDS-200C4HL