Bucktool BG2600, Инструкция по эксплуатации

Страница: 10 / 24

10
INSTALLING WORK REST ON GRINDING WHEEL
INSTALLING THE LED LIGHT AND EYE SHIELD ASSEMBLY
1. Attach the left tool rest (1) to the grinder
as the upper slot (2) to the nut (3) and
lower slot (4) to the protrude cylinder (5).
2. Place the lock knob (6) through the
washer (7) and lower slot (5) into the
hold (8) to lock the tool rest (1) in place.
1. Tighten the LED light assembly (1) to grinder with two composite screws (2)
using a Philips screwdriver.
2. Attach eye shield (3) to the support bracket (4) of the LED light assembly.
3. Tighten the eye shield (3) by using a carriage bolt (5) and lock knob (6) as shown.
BG2600
OPERA
TING INSTR
UCTIONS
1
2
3
5
8
4
7
6
Estimated Assembly Time: 5 - 10 Minutes.
NOTE: When in use, the tool rests should
be adjusted to within 1/8 in. (3.2 mm) of
the grinding wheel or other accessory
being used.
NOTE: Adjust eye shield to appropriate distance from tool rest avoiding interference
when operation.
1
2
6
5
4
3