BuckMaster FP-BR-10-ZC, Руководство пользователя

Страница: 8 / 39

Page 6
INSTALLATION
The Model FP-BR10-ZC Vent-Free gas fireplace may be installed in any
room in a Residential home or an After-Market* Manufactured Home.
(E
xception: This appliance may not be installed in a bathroom.)
* (After Market: Completion of sale, not for the purpose of resale from manufacturer).
For After-Market Manufactured Home installation, check with state and local codes.
This appliance is only for use with type of gas indicated on rating plate. This appliance is not
convertible for use with other gases.
NOTE: See page 14 for “Producing Adequate Air For Combustion And Ventilation”.
CHOOSING THE LOCATION FOR YOUR FIREPLACE:
Figure 1 shows some of many ways your fireplace may be installed. Consider traffic pattern in your
room and location of doors and windows. Moving air from ceiling fans, open doors and hot air grills
may cause the flames to soot. If a disturbance is found that affects the flames, it must be eliminated by
turning off ceiling fan, closing the door or closing or moving th hot air register. A corner location may
be best where space is limited.
Your fireplace weighs no more than some of your fine furniture. If fireplace is located near a load
bearing wall, additional supports to foundation will not be necessary. HEAVY FACINGS, SUCH AS
BRICK, STONE, ETC., MAY REQUIRE ADDITIONAL FOUNDATION SUPPORT.
NOTE: If this appliance is installed directly on carpeting, tile or other combustible material, other
than wood flooring, appliance shall be installed on a metal or wood panel extending full width
and depth of appliance.
GAS LINES
The gas supply line and electrical supply must
be installed before framing in fireplace by a
licensed installer.
DRAFTS
Do not locate fireplace in high traffic areas or
areas exposed to high drafts and winds.
Locate fireplace away from furniture and
draperies.
FIGURE 1