Buckleys DCCT, Руководство по эксплуатации

Страница: 5 / 20

DCCT Pinhole Detector
5
Unpacking
Remove the DCCT and its accessories from the packaging and check for
any damage. Should any item be damaged, notify the supplier and carrier
immediately. Keep all packing material for inspection. Do not use the
equipment.
Specifications and symbols
DCCT unit Type Output test voltage (DC neg.)
DCCT 1 – 7.5 kV Adjustable 1kV to 7.5kV
DCCT 2 – 15 kV Adjustable 2kV to 15kV
DCCT 4 – 30 kV Adjustable 4kV to 30kV
DCCT 5 – 40 kV Adjustable 5kV to 40kV
Sensitivity: Variable (factory set for BS EN 62230).
Output current: Maximum continuous output current: <1mA.
Operating time: Continuous
Weight: 17 Kg
Dimensions: 500mm (W), 300mm (H), 330mm (D)
Meter accuracy: <2%.
Mains supply voltage: 110/120V or 220/240V, 50/60Hz.
Standard:
Conforms to BS EN 62230 - Electric cables,
Spark-test method.
The following symbols are displayed on the DCCT equipment for your safety
and protection. Failure to comply with the instructions contained in this
manual could result in damage to the equipment or personal injury.
Caution, risk of danger Caution, risk of shock Chassis terminal
NOTE: It is important that you read this manual fully to familiarise yourself
with the DCCT unit.