Buchi Rotavapor R-200, Руководство по эксплуатации

Страница: 16 / 60

16
BÜCHI Rotavapor R-200/205
4.10 Adjusting tension of the servo jack rope
It can happen that the servo jack can not be lowered to the
very end, specially after transportation of the Rotavapor. In
this case the tension of the rope has to be adjusted. This can
be done by the customer.
1. If the servo jack can not be lowered to the end, turn the
screws (1) on the front side of the rotavapor, 1/4 turn
clockwise.
2. Repeat step 1 if the servo jack doesn't go properly down.
3. Turn the screws 1/4 turn unclockwise till the lever after
pressing down is not comming up on it self.
Picture 15: Adjusting tension of the servo jack rope
4 Putting into operation
!
"