Buchi Rotavapor R-200, Руководство по эксплуатации

Страница: 19 / 60

19
BÜCHI Rotavapor R-200/205
Picture 18: V condenser with position vapour temperature sensor, and
rear of the display module
4.13 Display module for vapour temperature and
rotation speed
Installing the display module
When the display module is installed into a Büchi Rotavapor
R-200, the unit becomes the Büchi Rotavapor R-205. If you
order R-205, this display module is already installed. If this
module is ordered separately, you can retrofit it as follows:
!
Screw out screw
!
and pull the cover plate to the back.
"
Lift the lower spring-loaded catch of the front plate and
remove the front plate
#
Connect the display module with the flat belt cable in the
apparatus
$
Connect the 2 pole cable with the display module.
Latch display module from the front to the Rotavapor and
insert it on the rear of the plug socket into the foreseen
holder (as shown in the picture
$
).
%
Screw the tower cover back on.
Installing the vapour temperature sensor
So that the vapour temperature can be displayed, the accom-
panying sensor must be connected. It is plugged into the
socket
!
located on the rear of the module.
The Sensor is lead into the corresponding opening of the
condenser
"
and screwed.
4 Putting into operation
"
#
$
!
"
top
!