14
EN
You will
fi
nd the size on the side of your tyres. If your tyre size is not on the list, you can enter a speci
fi
c size by selecting «OTHER» in the list. You must then enter the
circumference of the wheel in mm. There are 2 methods to work out the circumference:
- 1st method:
- 2nd method:
TOTAL KM: to change the total distance already covered.
NEW BICYCLE: to set a new bike. You can set up to 3 bikes, so 3 di
ff
erent speed/cadence
sensors.
If you enter the menu (press S), the computer will immediately start to search for the
new sensor (of the new bike). Don’t forget to turn the wheel or the crankarm so that the
sensor sends a signal to the computer. Once the sensor is connected, you can choose a
name for your bike (MTB, ROAD or OTHER). That name is now linked to the sensor.
REMOVE BIKE: to delete a set bike. Press
S
enter the menu, then select the bike by
pressing
B1
and
B2
then con
fi
rm with
S
.
LIGHT
Your computer has a backlit screen. You can switch it on or o
ff
in the LIGHT
menu. Press S to enter the menu, then press S a second time to make ON/OFF
fl
ash.
Select ON or OFF with
B1
and
B2
and con
fi
rm with
S
.
Once ON, the light switches on as soon as you press a button. Only activate this option
when necessary as it uses a lot of energy.
