b'Twin Bicycle, Руководство пользователя и условия гарантии

Страница: 20 / 29

20
L
M
N
ADJUSTING IN-HUB GEAR SHIFTERS
(NEXUS SHIMANO-type)
Refer to the component guide available on www.btwin.com, for the adjustment of in-hub gear systems.
SETTINGS SINGLE SPEED GEARS
(SPECTRO SRAM-type)
For single-speed bikes or bikes with integral gear shifters, you will need to have the chain tension checked (it loosens over time).
Excessive tension can impair performance and reduce its lifespan (hard pedaling).
Insufficient tension can cause the chain to come off frequently. Read the section on single-speed bikes carefully.
A correctly adjusted chain has a maximum vertical travel of 1cm. You adjust the tension by moving the rear wheel forwards or
backwards in the frame dropouts.
ADJUSTING SUSPENSIONS
Refer to fork and suspension adjustment settings recommended by the supplier, for the NEUF system, refer to the specific guide
for the NEUF system attached to this guide and available in the Menu, or on www.btwin.com. For other models, consult the
supplier guide for components on www.btwin.com
ASSEMBLING ACCESSORIES
We recommend that you follow the specific assembly instructions supplied with the accessory.
Warning
• Check with a b’Twin retailer that accessories to be fitted to your bicycle are compatible with it b’Twin.
• Check that all the elements of your bicycle work correctly when the accessory is fitted. The bicycle may respond differently when
accessories are fitted.
• Be particularly vigilant with accessories which may hinder wheel rotation, interact with a suspension frame in full travel or
change the shape of the frame using tightening devices.
• Non-suspended MTBs with a disk brake system: - are only compatible with child seats that attach to the frame's vertical tube,
-are not compatible with luggage racks.
• The child seat may significantly affect your bicycle's stability. It is not permitted to attach a child seat directly to the bike's seat
post.
Check that under no circumstances will any part of the child's body or clothing (laces, safety
belts, etc.) come into contact with any of the bicycle’s moving parts as this may cause injury to
the child or an accident. It is recommended that child seats are fitted to bicycles with protective
mud guards so that the child's feet or hands do not get trapped between the spokes of the wheel.
Similarly, it is best to use a seat cover or a seat with internal springs so that children do not trap
their fingers in the springs.
STOP
1 cm