15
G
H
STOP
USING QUICK-RELEASE
ASSEMBLING PEDALS
Blocking them maintains the wheels in position inside the frame and fork. In order to prevent it coming loose, it is necessary
to turn the adjusting nut (1) such that the closing force of the release lever (2) is at least 12 daN (about 12 Kg). To increase the
closing force: turn the adjusting nut clockwise (anticlockwise to reduce the force).
Please note: in case of doubt, consult one of our in-shop technicians.
Warning: Refrain from trying to tighten the pedals by hand, use a suitable spanner.
1/ Identify your pedal: Check the letter on the pedal: " L " or " R ".
2/ The pedal marked “R” is the right-hand pedal. Turn it clockwise to attach it to the crank.
3/ The pedal marked “L” is the left-hand pedal. Turn it anticlockwise to attach it to the crank.
4/ Adjusting shoe and pedal clamping systems: Please see your manufacturer's instructions.
CLOSED
OPEN
OPEN
CLOSED
Adjustment screw
1/ Set the adjusting nut
2/ Activate the quick-release
lever (strain 12kg)
3/ It’s finished!
Please note: when replacing your pedals, wheels, tyres, mudguards or cranks, the minimum clearance between the edge of the
wheel or mudguard and the pedal spindle must be greater than the distances indicated above.
Minimum distance D
D>89 mm for road and children’s bicycles
D>100 mm for mountain, City and trekking bikes
Содержание Bicycle
Страница 1: ...User guide and terms of guarantee...
Страница 23: ...23...