25
BTS
Biomedical
BTS
TMJOINT
system components
the probe continues to acquire, storing the data locally for one
minute and at the same time scans the assigned channel trying
to reconnect to the receiving unit.
If after one minute the scan is unsuccessful, the probe returns
to the “Active-Scanning” condition interrupting the storage of
data.
• Completely discharged or in “Deep Sleep” mode: LED is off.
If the probe is completely discharged the LED does not display
any flashing cycle and is off.
The same happens when it is in “Deep Sleep” mode (except
during the recharging phase in witch the led is steady blue).
The probes in “Deep Sleep” mode do not perform any
scan cycle, but are turned off. Is therefore guaranteed
energy savings.
To put the probe in “Deep Sleep” mode it is necessary to connect
them to the Charger switched on, or to put them in contact
with a magnet for half a second.
Before the next use is necessary to reactivate the probes,
putting them in contact with a magnet.
The probes are charged by a dedicated charger to which the probes are
connected via their respective clips.
For more info about the probes charge sse the paragraph “Charger”
of this chapter.
Содержание TMJOINT
