24
BTS
Biomedical
BTS
TMJOINT
system components
During the recharging phase the steady blue LED is on.
This phase occurs when the probes are connected to the charger
turned on, and the charge level is less than 90%.
When the charge level reaches 90% the led turns OFF.
Since, by connecting a probe to the charger on, it enters in “Deep
Sleep” mode, even while charging the probe will be completely
passive and does not respond to any commands.
• Active-Scanning: white LED which cyclically lights for a few
seconds.
In this mode the probe is searching for the receiving unit.
At intervals of about 1 minutes it carries out a scan of the
frequencies of few seconds. During the scan the white LED
flashes quickly.
• Active-Connected: white LED which flashes slowly.
When the probe and the receiving unit establish a connection,
the white LED begins to pulse slowly: the probe is waiting for
commands.
If the connection is interrupted, the probe returns to “Active-
Scanning” mode and attempts to re-establish the connection
with the receiving unit.
• Active-Capturing: white LED which lights and goes out at
regular intervals.
During acquisition the white LED flashes at regular intervals of
approximately one second. At the conclusion of the acquisition,
the probe returns to the “Active-Connected” condition.
If during the acquisition, connection to the receiver unit is lost,
Содержание TMJOINT
