![background image](http://html1.mh-extra.com/html/bticino/am-5875/am-5875_installation-manual_2825602008.webp)
Temperature control unit
8
2 DESCRIPTION OF THE CONTROL UNIT
2.3 The main screen
In the idle conditions a screensaver, which can be selected by the user among the ones
installed, will be displayed. Press any key to switch the display on and display the main
screen.
Background information
During normal operation the display shows the following information:
Expected
temperature
Temperature
measured
Mode set
information
System state
Winter/Summer
Weekly
program
Date/Time
Load state
ON/OFF
Editing the offset with the
ÅÇ
keys and the cycling between the modes with the
Ñ
key only have effect on the local zone and not on the whole system.
Depending on the set mode, the temperature of the whole profile (weekly or holiday) or the
set point (manual timer), can be changed by ± °C intervals using the
ÅÇ
keys on the main
screen.
With the
Ñ
key you can cycle between the mode selected (E.g.: Weekly), Antifreeze or
Thermal protection and OFF; the new local mode flashes, but is not active: press
OK
to
select it.