![background image](http://html1.mh-extra.com/html/bticino/am-5875/am-5875_installation-manual_2825602051.webp)
51
Once the test procedure is complete, the following will be
displayed should an error be present on the zone:
Check that any P seat on the probe has been config-
ured (P = CEN) and try again.
ZONE 2
ERROR
Verify the
probe
configuration.
Visualize Zones
Mode
Programming
Setup
Maintenance
5 MAIN MENU
5.5.1.3 Pumps
CONFIGURE ZONES
1:LIVING ROOM
2:
ZONE 2
3:ZONE 3
Pumps
ZONE 2
01: HEATING
02: -------------
03: -------------
Not connected
ZONE 2
01: HEATING
02: -------------
03: -------------
Heating
ZONE 2
09: -------------
HEAT 1
COOL 0
0
CONFIGURE ZONES
1:LIVING ROOM
2:
ZONE 2
3:ZONE 3
Pumps
ZONE 2
Zone test...
Press the
C
key to send the configuration set to the
zone.
continues
The zone test screen does not appear for the local zone, because the settings are
managed directly by the Control unit.