3
• Schema di collegamento video
• Video wiring diagram
• Selezione suoneria di chiamata
• Call bell selection
ON
BUS
344232
BUS
3499
OFF
BUS
344625
344625
Nota:
se dalla modalità Selezione suoneria di chiamata non si effettua nessuna operazione per più di 20“ si ritorna alla modalità di funzionamento normale.
Note:
if no action is performed during call ringtone selection mode for more than 20”, the device returns to normal operating mode.
> 30 sec
1
2
16
1
2
16
1
2
16
• Selezione suoneria di chiamata da posto esterno principale (S=0)
• Call bell selection from the main entrance panel (S=0)
• Selezione suoneria di chiamata al piano
• Floor call bell selection
• Selezione suoneria di chiamata intercomunicante
• Intercom call bell selection
1
3
2
2
2
Riagganciare per confermare la selezione
o attendere la fine della riproduzione della
suoneria per eliminare la memorizzazione.
Replace the handset to confirm the selection or
wait for the ringtone to end to avoid saving.
Sollevare la cornetta ed attendere più di 30”, il
led lampeggerà in rosso per indicare l’entrata in
programmazione.
Lift the handset and wait at least 30”. The LED will flash red
to indicate that the device is in programming mode.
Non avvicinare la cornetta all’orecchio quando si effettua la selezione della suoneria di chiamata.
When selecting the call ringtone, do not move the handset close to your ear.