Bticino 2 WIRE VIDEO DOOR ENTRY AND HOME VIDEO SURVEILLANCE SYSTEM, Руководство по проектированию и установке, Страница: 147 / 174

BUS
PS
BUS
TK
BUS
PI
BUS PI
BUS 2 1
BUS PL S+ S-
230 Vac
BUS PE
S
X
230 Vac
BUS 12V~ BUS C NO
PS
230 Vac
S
JMP 1
JMP 2
JMP 3
JMP 4
BUS 2 1 BUS PL S+ S-
PS
230 Vac
BUS PE
230 Vac
S
145
2 WIRE
VIDEO
DOOR
ENTR
Y AND
HOME
VIDEO
SUR
VEILLANCE
SY
STEM
dOOr lOCK COntrOl frOm BUs
dOOr lOCK COntrOl WitH aUXiliary transfOrmer
Installation on video systems
P
= –
= –
N
= –
= 1
t = –
A = –
PL = –
M = 1
SPE = 7
Aux = –
using the special control, 4651M2 type, the door lock control
is timed
the x pushbutton opened the door lock of the entrance panel
configured with P = 0 (the special control configured with A=0
and PL = 0 act on the entrance panel configured with P=0).
NOtE: in audio systems, the wiring of the special control
4651M2 can occur in any point of the system
P1
P3
P2
P4
P1 = A/PL + 1
P2 = A/PL + 3
P3 = A/PL
P4 = A/PL + 2
With SFERA 342170 or 342350 speaker
module
Predispose the jumpers as indicated here.
The PL and S+ contacts can be crossed by a
maximum power of 24 Vac/dc.
Remove the JMP1 and JMP2 jumpers from
SFERA speaker module
With SFERA 342150 audio speaker module
The 12~ wires must not be wired through
the power supply (item 346010) and the
speaker module (item 342150).
The C and NO contacts can be crossed by a
maximum power of 8A (res) to 24 Vac/dc.
Power supply
Speaker module
= disconnected jumper
= inserted jumper
Auxiliary transformer
Power supply
Speaker module
Auxiliary transformer
Entrance panel
4651M2
346000
346830
346000
342170
346010
342150