BTEK HRB, Руководство по установке

Страница: 15 / 20

16 HRB Bench Scale Installation Instructions
Option installation
4.2 Underhook option
These instructions cover the installation of the HRB underhook kit, AWT05-507965.
1. Assemble the parts to look like this final assembly.
2. Remove the round platter from the top of the scale and turn the scale on its
side.
3. Use one or two small screwdrivers to pry off the two plastic caps indicated by
the arrows above. The second photo shows them both removed.
4. Place the underhook assembly through the two holes in the base of the scale.
Tools needed:
l
1/4” open end wrench to tighten long standoffs
l
Phillips screwdriver
l
11/32” nut driver
l
small straight blade screwdriver(s)
Note that there is a nut that is installed above the hook.
This can be tightened against the top of the hook to lock it
on the screw and allow the hook to swivel.