BTEK HRB, Руководство по установке

Страница: 13 / 20

14 HRB Bench Scale Installation Instructions
Option installation
3. Slide the panels into the slots on all four sides. Because of the built-in curve of
the corner posts, the panels will probably only slide into the slot in the lower
section of the post. This is normal.
4. Place the top panel in place. Be sure the pairs of alignment pegs in all four
posts engages into the holes in the top panel.
5. Use a Phillips screwdriver and attach the top plate to the corner post using the
four remaining screws.
The draft shield is now complete. Each panel can slide up until the nylon spacer snaps
into the small catch on the top plate.