BTECH UV-25X2, Руководство пользователя

Страница: 9 / 83

2 VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
UV-25X2 / UV-25X4 / UV-50X2
Chapter 1. – Getting Started
BEFORE PROCEEDING INSURE:
•
Qualified technicians shall service this equipment only. Do not modify the radio for any
reason.
•
Use only BTECH supplied or approved accessories.
•
Turn off your radio prior to entering any area with explosive and flammable materials. Do
NOT USE your transceiver at a gas/fuel station
•
For vehicles with an air bag, do not mount your radio in the area over an air bag or in the
air bag deployment area.
•
Do not expose the radio to direct sunlight over a long time, nor place it close to a heating
source.
•
If the unit emits smoke or an odor, you should immediately cut off the power supply. Then
send the radio to the nearest service center or dealer
•
Do not operate the mobile transceiver on high power unless it is necessary. Do not transmit
for long periods of time, as it may overheat the transceiver.
•
Keep the unit away from dusty, damp and wet environments
•
Use the correct power supply (~13.8V); do not use incorrect or higher voltage (e.g. 24V)