BTECH UV-25X2, Руководство пользователя

Страница: 28 / 83

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 21
Making a call
Press and hold the PTT button on the side of the handheld mic to transmit. While transmitting,
speak approximately 3-5cm (1-2 inches) from the microphone. When you release the PTT your
transceiver will go back to its receive mode.
Channel selection
There are two modes of operation: Frequency (VFO) mode, and Channel or Memory (MR) mode.
For everyday use, Channel (MR) mode is going to be a whole lot more practical than Frequency (VFO)
mode. However, Frequency (VFO) mode is very handy for experimentation out in the field.
Frequency (VFO) mode is also used for programming channels into memory. For details on how to
program your transceiver see Chapter 4,
Programming .
Ultimately which mode you end up using will depend entirely on your use case.
Frequency (VFO) mode
In Frequency (VFO) mode you can navigate up and down the band by using the and keys
(or rotating the selector knob). Each press (or rotation click) will increment or decrement your
frequency according to the frequency step you've set your transceiver to (Menu Item 1: Step)