BTECH UV-25X2, Руководство пользователя

Страница: 57 / 83

50 VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
UV-25X2 / UV-25X4 / UV-50X2
4. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad.
5. Press to confirm and save.
6. Enter on the numeric keypad to go to transmitter CTCSS.
7. Press to select.
8. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad. Make sure it's
the same frequency as that you entered for receiver CTCSS.
9. Press to confirm and save.
10. Press to exit the menu system.
To turn CTCSS off, follow the same procedure but set it to off with the key instead of selecting a
CTCSS sub-tone frequency.
For more information see the section called “11 R-CTCS - Receiver CTCSS” and the section called
“13 T-CTCS - Transmitter CTCSS” in Appendix B, Menu definitions.
DCS
DCS is set with menus 10 R-DCS and 12 T-DCS.
For a complete list of available DCS codes, see Table C.1, “DCS Codes” in Appendix C,
Technical specifications .