BTECH UV-2501, Руководство пользователя

Страница: 22 / 47

16 VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
UV-2501 / UV-5001
name and frequency simultaneously)
32. [F Key] + [3] + [2] : PONMSG - PowerOn message. Display mode setting. FULL: All the
display icons illuminate when you turn on the radio (screen test). MSG: displays the PC
set PowerOn message. BATT-V displays battery voltage at PowerOn.
33. [F Key] + [3] + [3] : WT-LED - standby backlight setting. OFF: no backlight. Color options
are BLUE, ORANGE and PURPLE.
34. [F Key] + [3] + [4] : RX-LED - receive backlight setting. OFF: no backlight. Color options
are BLUE, ORANGE and PURPLE.
35. [F Key] + [3] + [5] : TX-LED - transmit backlight setting. OFF: no backlight. Color options
are BLUE, ORANGE and PURPLE.
36. [F Key] + [3] + [6] : MEM-CH - saves the selected channel.
37. [F Key} + [3] + [7] : DEL-CH - deletes the selected channel
38. [F Key] + [3] + [8] : SFT-D - Frequency difference direction setting. OFF: no frequency
difference. ( +) : Transmit offset amount will be a positive offset (higher than the receive
frequency). (
- )
: Transmit offset will be a negative offset (amount will be lower than the
receive frequency).
39. [F Key] + [3] + [9] : OFFSET - difference between the transmit and receive frequency.
40. [F Key] + [4] + [0] : ANI – Displays the radio ID code. Code only can set by PC software.
41. [F Key] + [4] + [1] : ANI-L - ID code length. Length = 3, 4, 5.
42. [F Key] + [4] + [2] : REP-S – Tone burst repeater settings. Pressing CALL will send a