VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
37
repeater, you can set the
requirements to relay
signals)
TONE
Forward after receiving correct mono audio (Menu
42)
DTMF
Forward after receiving assigned DTMF code. (ANI)
44 TDR-AB
TDR Return Time Delay
OFF
Function OFF
1 > 50 seconds
This is the delay time before returning to the
primary channel after secondary signal is clear.
45 STE
Squelch Tail Elimination
Requires both radios have
function ON.
OFF
Function OFF
ON
Eliminates squelch tail at end of transmission.
46 RP-STE
Repeater Squelch Tail
Elimination
Requires a repeater using
this function.
OFF
Function OFF
1 > 10
Delay Time
47 RPT-DL
Repeater squelch tail
delay.
OFF
Function OFF
1 > 10
Delay Time
48 MIC-G
Microphone Audio
Modulation Level
0 > 127
The Audio level of the transmitted microphone
audio being sent over the air. 0 is the quietest level
– while 127 is the loudest.
48 DTMF-G
DTMF Audio Modulation
Level
0 > 60
The Audio level of the DTMF tones being sent over
the air. 0 is the quietest level – while 60 is the
loudest.
50 RESET
Initialize to Factory
Defaults
VFO
Menu Initialization
ALL
Menu and Channel Initialization
Содержание UV-2501
