background image

6

Warning

1.

Use only the approved battery pack supplied.

Spare batteries – Item Code: 871285 are available
from BT Shops and the Synergy Helpline

0845 650 20 20

.

2.

Do not try to use any power supply except the

one provided, otherwise you may permanently
damage your Synergy 1400. It may also invalidate
approval of this apparatus. To get a replacement
Synergy 1400 base station power supply unit
(Item Code: 871343/or 871720) contact the
Synergy Helpline 

0845 650 20 20

.

3.

There is a slight chance that your phone

could be damaged by an electrical storm. We
recommend that you unplug your Synergy 1400
from the mains power and telephone line socket
during storms.

4.

If you wear a hearing aid, please note that the

Synergy 1400 works by sending radio signals
between the base station and handset. These
signals can interfere with hearing aids, causing
a humming noise.

5.

Synergy 1400 can interfere with other

electrical equipment, e.g. answering machines,
TV and radio sets, clock radio/alarms and
computers if placed too close. It is recommended
that you place your Synergy 1400 at least one
metre away from such appliances to minimise
any risk of interference.

6.

The Synergy 1400 will produce a certain

amount of heat during operation. Equally, the
handset as well as any additional chargers you
purchase can also become warm during
charging. 

7.

We advise against placing these products on

antique, veneered or wooden surfaces as damage
may occur. 

8.

Do not use the Synergy 1400 in damp, humid

conditions such as bathrooms. Do not expose
the equipment or batteries to fire or water.

9.

Do not dispose of used batteries with general

household rubbish and do not burn them.

10.

Do not use the handsets in places where

there are explosive hazards.

11.

Make sure you connect the power and

telephone lines to the correct sockets in the
base station.

12.

Clean the handset and base station with a

damp (not wet) cloth or antistatic wipe. 
Never use a dry cloth as this may cause a static
shock. Never spray cleaning fluid directly onto
the telephone.   

PLEASE NOTE

The Synergy 1400 system has a range of up to
300 metres outdoors and up to 50 metres indoors.
It is possible that the range may be affected by
being near water (e.g. large ponds, lakes and the
sea) as well as large metal objects (e.g. radiators,
metal partition walls and steel girders).

Содержание SYNERGY 1400



































































Отзывы: