Setting up
9
Need some help? Call 0800 145 6789* or go to bt.com/producthelp
Switching on and linking the Parent and Baby units
Before switching on, make sure the Parent and Baby
unit are at least one metre from each other. Any
closer and you might get audio feedback sounds.
1. Press and hold the button on the Baby unit until
the orange Link indicator flashes.
2. Press and hold the button on the Parent unit
until all the LEDs on the unit briefly light up. The
orange Link indicator will flash and then will remain
steady when the units have linked.
3. When the units are linked, the orange Link indicator
lights on the Parent and Baby units will stop
flashing. When the lights stay steady, your monitor
is ready to use.
Deciding where to put your units
The Baby unit should ideally be within 1 to 2 metres
of your baby. Make sure both the Baby unit and
mains power cable are connected securely and
they’re out of baby’s reach.
If the Parent and Baby units are too close together,
you’ll hear a high-pitched noise. That’s because the
units are designed to be put at a distance from one
another, such as in separate rooms.
