BT Multifax 2020 Скачать руководство пользователя страница 69

Страница: 69 / 80

Multifax 2020 ~ 1st Edition ~ 20th November ’01 ~ 4207

Caution

Do not expose the image drum unit to light for more
than 5 minutes. Always hold the image drum unit by
the ends.

Caution

Do not expose the image drum unit to light for more
than 5 minutes. Always hold the image drum unit by
the ends.

WARNING

Be careful when handling the toner cartridge. See
Safety information, page 8.

WARNING

If you open the top cover, you will see a label that reads

CAUTION – HOT

. This area is extremely hot and must

not be touched.

Carefully pull out any paper you see inside the
machine.

Replace the image drum unit. Ensure that the tabs

on both sides of the drum slot into the machine
as shown. Press down firmly on both ends of the
drum until it clicks into place.

Close the top cover.

Push the control panel back until it clicks into

place.

Pull the paper out of the paper tray. If any of the

sheets are damaged, remove them.

Reload the paper.

Replacing the toner cartridge

When the cartridge is almost empty, the display
shows

REPLACE TONER CART.

and the print quality

starts to get lighter. You should replace the
cartridge immediately.

Replacement toner cartridges and image drum units
can be obtained by telephoning

0800 590 009

It is important that you do not use any toner other
than that specifically intended for use in the
Multifax 2020. Using the wrong toner may damage
your machine and invalidate your guarantee.

Open the top cover.

Pull the control panel up and forward.

Содержание Multifax 2020

















































































Результаты поиска

Содержание Multifax 2020

Отзывы:

Похожие инструкции для Multifax 2020

Бренды по названию

Популярные бренды

BT Multifax 2020, Руководство пользователя

Результаты поиска

Содержание Multifax 2020

Отзывы:

Похожие инструкции для Multifax 2020

Бренды по названию

Популярные бренды